 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My furnace- a Trane XL80 lights for maybe 10 seconds then shuts off. It will do this for several cycles, then quit. If I turn off the thermostat and turn it on again, the sequence will repeat. I have looked into the problem and it seems that the exhaust fan (located at the bottom of the flue) isn't...
Hello. I'm having a problem with my Trane XL80 heater. After the ignitor lights the burners, sometimes the burners will blow right out and start again for a total of five times. Then the system shuts off, no heat. A friend tells me the sensor(?) needs to be replaced. This sensor looks like a...
Hello My furnace blows cold air at the beginning and at the end of each cycle, is this normal? Also the furnace seems to start every 15 minutes regardless of whether the temp. drops or not. I was watching the thermostat last night and the temp. would not drop on the thermostat screen but the...
The heater will run for awhile and then I will get the @ Flashes code! External Lockout (Retries or Recycles Exceeded) What will solve this problem? Dorsia
Hi, Keep getting the blinking light on the control panel. Flashes 4 times it say's it means that the thermal protection device is open. O.K. what does that mean . And can I fix or do I have to call a repair man Thanks Jimmyd
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
