 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mtd ignition wiring
I have an MTD ride-on mower. Model 13AD604G501. The ignition switch is part number MTD 925-1741 (7pin) The mower starts fine and runs fine but there are 2 problems. The lights don't come on (light position on the ignition switch) and The off position won't shut down the motor. I know it has to be electrical but I can't find a wiring diagram for the ignition to be able to test anything. If you have any ideas or answers to what might be causing this, or a link to a wiring diagram I would really appreciate it.
Thanks much |
||||
|
||||
|
On the ignition switch you probably will find two green ground wires. One goes to a ground point some where. The other goes to the ignition coil. That one probably has a disconnect in it. If disconnected, the ignition switch will not ground the ignition coil when turned to off.
There should be a fuse in the light circuit. Trace from ignition switch to headlights. Check ground wire for head lights. |
||||
|
||||
|
Hi,
There is one thing that both of those circuits have in common and that is a ground. To complete the circuit for the lights and to ground the ignition to shut the engine off. That is what I would look for - a black wire not connected or broken. Here is a picture of the wirring harness. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Help I have a 1999 yard machine lawn tractor,I had to replace the ignition switch ,but now I don't know which wires goes where.It had 7 wires and 7 tabs for the wires on the ignition switch.Please help with a diagram to where the wires go? Any help would be appreciated.Thanks.Bobby.
I have an mtd 20 horse riding lawn mower the wiring has been disconnected from the solenoid and the grounds where do I hook the wires coming out of the harness? I have the battery leads hooked up 1 to the large solenoid post and one to chassis ground. The other solenoid wire I have running to the...
My MTD riding mower (an older model) does not make any attempt to start the engine when I turn the key on the ignition. (no sound, no turning over of the engine, nothing). It is similar to what happens if the blades are down. (But they arent). When I attempted to start the engine at the...
5 wires on the back of my ignition switch 1. On one terminal there are 2 wires dark green wires 2. On another terminal there is 1 wire Black and it is hot all the time 3. Then on another terminal there is 2 yellow wires 4. Then another terminal has 1 orange wire hot when key in start...
Does anyone have a wiring diagram for starter solenoid on a MTD 8 HP riding mower
View more questions Search
|
