 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York YP9C high efficiency gas furnace startup fault
During a normal heating cycle startup the main blower runs at high speed for 5 seconds blowing cool air during the inducer fan stage and before main burners ignite. Is this a faulty thermistor sensor and how can I test it? Filter is clean
|
||||
Check out some similar questions!
How can I access the AC coils on the inside of furnace to clean them?
When the temperature was high in the past days, I noticed that Air conditioner takes a long time to cool. The AC is working. How do I check if the fan is working ?
The furnace starts up, ignights runs a little just before the blower would start, it resets it's self and starts over the process. I counted 6 light blinks and that's all it does, over and over... What is wrong? Please help! Thanks
In Sept 2010, we had a York yp9c 98% efficient propane furnace installed. Last week we began noticing a slight odor when the furnace as running, especially on high volume. My wife began having headaches, and I am feeling tightness in the chest and some coughing. The installing company sent out a...
We installed this used furnace but can't seem to find were to hook up a 2-wire thermostat
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
