 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Concord 90 plus high efficiency gas furnace 6 light blinks
The furnace starts up, ignights runs a little just before the blower would start, it resets it's self and starts over the process. I counted 6 light blinks and that's all it does, over and over...
What is wrong? Please help! Thanks |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My furnace is blowing cold air . Pilot light is not working , its electric. I don't have money to pay an repairman. Thank you
We installed this used furnace but can't seem to find were to hook up a 2-wire thermostat
My furnace has been working on and off for about 5 months... first it would go out completely.. and I found the wiring was loose.. then it worked for a few weeks.. now it doesn't work at all.. when I reset it the first time the LED lashed 3 times for the pressure switch... and I reset it again now...
For past few days home temperature drops down approx 6-7C degrees at night so I checked the furnace which gives me sometimes (6) LED signals other times (3) LED signals. I followed the back panel instructions also drain out water from tube connecting to motor and restart, however each time it lasts...
If my hubby is correct, our central air also is "powered" by our furnace. For some reason, the air conditioning isn't working right. If you leave it on for more than an hour, it freezes up the lines going to the unit outside and only brings down the temp in the house by one degree! He cleaned it...
View more questions Search
|
