 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heating Thermostat Problems
Hello. I have a problem with my thermostat. The inside temp is 68. I set the thermostat to 70. Once the inside temp gets to 70, it won't cut off it keeps running. I can hear a click calling for it to cut off, but it keeps running. I need help because if not I'm going to have to cut it off or pay a high electric bill! It also 37 degrees in ga, so someone please help me!
|
||||
Check out some similar questions!
Brand-new Comfort-Aire 80% furnace with Pro digital thermostat. Set thermostat at 69 degrees. Furnace goes on, temp goes to 69. Furnace shuts off. Then it gets cold but thermostat shows 68. Then it comes back on. I shouldn't feel cold if it only dropped 1 degree. Help!
I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...
I don't know much about HVAC because I haven't had many problems till now. My thermostat (honeywell T8001C) display goes blank and the heat will not turn on. I've tried flipping the breakers in the garage. That won't work. Any ideas?
I am trying to wire up my underfloor heating but I'm not sure weather the wire with the power is the load or feed, if any one could let me no that would be great. Thanks. Darren
I have installed a new Honeywell thermostat in my apartment. I have a Electo-Hydronic Mark III heating/ac unit made by Snyder General. The problem that I'm having is as follows: When the heat first starts it takes a few minutes, maybe 3-5 for the actual heat pump to kick on. At first its just...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
