Replacing old thermostat wires don't line up

Larry Arney Posts: 2, Reputation: 1

New Member

Jan 22, 2013, 05:37 PM

Replacing old thermostat wires don't line up

My real questions are about the blue and the black wires. I assume all others go in the slots including the yellow one... is this correct?

Check out some similar questions!

Replacing an old thermostat from the 1970s, but it only has 2 wires, how do I wire it [ 2 Answers ]

There's one black and one white wire, where do I put into new thermostat g,w,y,r or rc?

Replacing thermostat which has 7 openings, but I have 8 wires [ 0 Answers ]

The old thermostat has red, black, green, red, yellow, purple, orange, white, and only 7 "openings" on new thermostat and each thermostat (old and new) are labelled differently. Which wires go where? New thermostat has y rc rh w-o/b g h2 h1. The old one had 1 unlabelled (purple); f(green);...

Replacing lennox t-90 thermostat with honeywell RTH111B1001/u matching wires [ 1 Answers ]

Didn't label wires when replacing thermostat [ 12 Answers ]

HELP! I replaced my old thermostat with a new digital HOneywell one, but I did not label the wires, I thought I had done everything correctly in reconnecting them, but now I have no heat. The fan runs, but no heat is coming out - as if the unit THINKS it is heating, but the air coming out is...

Replacing a old thermostat with a new one, wires don't match up [ 2 Answers ]

Hi there We were lucky enough to get a Lowe's gift card for christmas so today we went and bought a programmable thermostat. Our old one is from when the house was first built I think (so at least 20 years old).. new one is a Hunter 44550 old thermostat seems to be no name brand.. ...

View more questions Search

Check out some similar questions!

Add your answer here.