 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have an Intertherm Nat. gas furnace,. Model # MMHA - 056 - AAHR -05. The small vertical Booster motor (Cumbustion Blower Motor ) runs constantly. The Thermostat can be set at 80 deg... and the actual room temp. will get no more than 62 deg. The blower ( fan ) motor works fine coming on, and...
I have a Trane XE 80 gas furnace and a Trane air conditioner. I cannot get either one to come on when I call for the heat or cool. Blower will not respond either. I can get furnace to fire if the manually do it at the furnace, but it cuts out after about 30 seconds. What could be the problem
I have a Rudd furnace which is 15-16 years old. Lately, it's giving problem when the temperature goes around zero degree outside. When outside temp goes to appx 55-60 deg. It will start to work again. I called maintenance/repair person to look at it and he couldn't find any reason. My son looked at...
Hello I have a Altra 90 SX Armstrong furnace that has a cycle problem. The model # is a GUK75D103A with a Heatcraft control board 404030001 Cat. # 70K98 The problem that I'm actually having is that it is going through its cycles OK, except the induced fan keeps running and won't shut off. ...
I have an Coleman Evcon Furnace. Model #15020A the problem is I replaced the Inducer motor, and The furnace starts like normal but then the flames goes out after about a minute or two. The LED light says the Pressure switch is stuck open but it seems fine. I tried to replace the PC board but can't...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
