Ask Experts Questions for FREE Help !
Ask
    AMPERE's Avatar
    AMPERE Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2013, 02:08 AM
    Two different sizes of conductors running through the same hole in wooden studs
    I am running a 14-2awg with a 12-2awg through the same bore in wooden studs in my home will this cause induction heating?

    Thanks Ampere
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jan 17, 2013, 02:49 AM
    Moved to Electrical Forum.

    No. Induction heating is accomplished by a coil.Different size conductors are adjacent to each other in raceways often with no effect.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

House framed with 2 x 3 studs & doors are pre hung for 2 x 4 studs [ 2 Answers ]

I have a problem, bought a house to remodel a few years ago, also bought some materials to do the rehab, like doors, fixtures etc.. All the doors are solid core interior framed for 2 x 4 walls, just started to remove old and replace, and in doing so I find out that the interior walls are studded...

Revolving Hole Punch sizes 1/4 to? [ 2 Answers ]

I need a hole about 1/2'' length by 1/8 diameter.

Running multiple wires through holes in studs [ 12 Answers ]

Hello, I'm roughing in an addition and adding lighting and receptables (on separate 15 amp circuts) in accordance with NEC. But I cannot find anything that tells me if I can run more than one wire through the holes drilled vertically along the run through 2 X 4 studs (drilled 1 1/4" from the...

Metal studs vs. Wood studs [ 2 Answers ]

Can metal studs be used in a basement setting where there is no water problem?

Using Wood Studs with Metal Studs [ 1 Answers ]

I am in the process of adding a guest room and bath in my basement. The currect wall studs are metal. I have never worked with metal stud before therefore I am wondering if I should continue with metal or can I use wood as well. The current studs look like they are 24 oc. I have to frame in a...

View more questions Search