Ask Experts Questions for FREE Help !
Ask
    madsandman's Avatar
    madsandman Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 16, 2013, 12:50 PM
    Replaced contact switch on the heat pump compressor. Will not power on.
    American Standard 1 1/2 tone heat pump, replaced the contact switch on the compressor unit. Replaced wires per pic I took. Turned the thermostat to heat. Increased the temp above the ambient room temp. the air handler powered on. Went outside to the compressor, it was not powered. I pushed in the contact switch, unit powered up. Release the button, no power. What else could it be?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jan 16, 2013, 12:57 PM
    Why did you change it in the first place? What was wrong?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My heat pump runs good on a/c but when switched to heat compressor shuts off. [ 0 Answers ]

Heat pump works good on a/c but when I switch to heat it starts OK (big copper line gets very hot) but after 2 minutes the compressor shuts off (condenser fan stays on) After about 8 minutes the compressor starts again then shuts off after a couple of minutes, the heat pump is a trane 5 tone2001....

REplaced well pump, wired wrong, blew fuses, replaced fuses, now no power. Now what. [ 12 Answers ]

My husband replaced our well pump, didn't read instructions for wiring, so wired it wrong. Hit the power and blew the fuses. He replaced the fuses, but there is still no power whatsoever to the well. We checked breakers in the house although none are marked as controlling the well. All appears fine...

Heat pump outdoor fan runs not compressor voltage at compressor good. New compressor [ 1 Answers ]

Have a new compressor. Just replaced fan runs compressor does not, have voltage at the compressor plug? What could stop from coming on high side and low side equal at 100psig.

Goodman cpl t30-1a heat pump, heat not working/no compressor or fan operation [ 5 Answers ]

The thermostat is operating/clicks on when desired temperature is more that the actual, but no action at the compressor or fan. We even switch thermostats from other unit in house and both operate the other unit correctly.

Replaced Transformer on Trane heat pump still no power [ 5 Answers ]

Today I woke to no power to thermostst. Through this site I found out about the transformer. Check power to transformer good 120volts each wire. But no voltage out. Replaced transformer. Wired red to red and white to white incoming power. And blut to black blue and red to black red out coming....


View more questions Search