Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heat pump transformer
[ 3 Answers ]
Where is the transformer and what does it look like and how can I tell if it is bad?
Replaced transformer
[ 2 Answers ]
I had to replace the transformer on my furnace, the little switch beside the fan the on and auto was damaged too I couldn't find one so the man I got the transformer from said to just by pass it and tap it off,, well when I cut the air on ,the fan will come on automatic,, when I cut the heat on...
Transformer buzz on heat pump
[ 4 Answers ]
We just got a new heat pump/furnace/airconditioner installed (Trane) and you can hear the "buzz" of the transformer on the outside unit all of the time. Our old unit did this, but I always assumed it was because it was getting old and something was wrong. Is this normal? And why is the...
Buzzing transformer replaced but still down
[ 1 Answers ]
Hi, my furnace just quit working with no warning of any kind. Upon inspecting it I find that the transformer was buzzing and hot so I replaced it. The furnace is still not working, no sound. No pilot, nothing. It is a pilot-free,gas-fired, horizontal furnace(sears brand). Could it be the...
Trane Heat Pump tstat replacement with Honeywell prog - wiring question
[ 1 Answers ]
I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -... View more questions Search
|