Ask Experts Questions for FREE Help !
Ask
    buddellen's Avatar
    buddellen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2013, 06:47 AM
    Furnace questions my furnace warms to 70 then goes to 65 & doesn't kick back up
    My furnace works great when it is on but it will heat to 70, then go down to 65 & doesn't kick back up until maybe an hour later or we have to shut it off & restart it & then it is fine

Check out some similar questions!

My furnace starts and warms up but sometimes the blower won't start for a number of . [ 0 Answers ]

Start over: the furnace will come on and the pilot light will ignite but it take sometimes as much as 5 minuits before the blower and the furnace lights and starts working.

Furnace will kick on only if I reset the power at the furnace [ 1 Answers ]

I have a Carrier Furnace and a Honeywell CT3200 Programmable thermostat, about 5 years old. I have it set on Auto and Hold Temp 72 degrees The furnace quit working a few days ago. The only way to get the unit started again was to reset, turn off and then turn on again, the power at the...

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Day & Night - furnace Motor runs but doesn't blow air [ 1 Answers ]

Day & Night - Furnace Motor runs but doesn't blow air Thanks.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.