Day & Night - furnace Motor runs but doesn't blow air

moon510 Posts: 1, Reputation: 1

New Member

Jan 1, 2008, 05:43 PM

Day & Night - Furnace Motor runs but doesn't blow air

Day & Night - Furnace Motor runs but doesn't blow air

Thanks.

KISS Posts: 12,510, Reputation: 839

Uber Member

Jan 1, 2008, 10:24 PM

Look for a broken belt. Belts are somewhat unusual.

The blower could have rusted and needs to be replaced.

Add your answer here.

Check out some similar questions!

Furnace runs sporadic - on and off all night [ 10 Answers ]

I have an older furnace (20+ years) and it is keeping us up at night. We had some extra ducts put in when we finished the basement and at the time we were right at the edge of what the furnace could run (it is approx 55% effecient). The house is always cool and not a lot of heat reaches the...

Oil furnace Blower runs no heat [ 9 Answers ]

I am having a intermintant problem with my furnace, I came home the blower was on no heat , I checked the themostat setting - ficked the service switch off and on a couple of times- burner started, I can hear the burner when it comes on, the furnace ran all day without problem I wake in the night...

Goodman furnace fires up, but no blow.(new motor) [ 1 Answers ]

The furnace fires up for a few minutes but the blower motor doesn't engage. Then the safety switch kicks in and turns the flames off. You can hear the click of the relay and the low moan of the motor trying to go. Sometimes it'll click on.. you hear the motor strain... then click off, then click...

Clothes dryer runs, but does not blow heat. [ 1 Answers ]

Is the problem one of the thermostats and if so, which one? Thanks..

Gas furnace runs two cycles [ 1 Answers ]

My gas furnace is approx. 30 years old. The furnace will run one cycle, shut off and approx. 15 seconds later run again for a shorter period. Everything is working properly, heating correctly etc. but runs two cycles. Any thoughts on why?