Ask Experts Questions for FREE Help !
Ask
    notsohandy58's Avatar
    notsohandy58 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2013, 01:18 PM
    Whirlpool ultimate care II not draining
    Washer not draining and have checked lid switch and pump. Lid switch in tact and pump clear. With the pump off and I turn the pump shaft on the motor be hand. Should the agitator shaft move?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jan 5, 2013, 09:25 AM
    Look at these: https://dl.dropbox.com/u/8010163/Whi...%20Washers.zip
    https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
    It depends on direction of rotation. You have several things you need to check, first.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool ultimate care II is overheating [ 3 Answers ]

Hi, my whirlpool ultimate care II gas dryer is overheating. It will run hot for about 4 minutes then it starts to blow cold. Can anyone help? The vents are clean and no lint anywhere. Thanks, Karol

Ultimate care whirlpool washer [ 0 Answers ]

Am not able to get hot water to come out... am only able to get cold water washing done. Any clues on this? It was working perfectly and now it isn't.

Whirlpool Ultimate Care II does not fill [ 0 Answers ]

My Whirlpool Ultimate Care II top loader does not fill for more than :30 seconds before stopping. The timer continues but it does not fill enough to agitate. It drains and spins fine. I checked hoses for blockage and they're clear. I bought it online recently and using it for the first time. ...

Whirlpool Ultimate Care II LSQ9010PW6 [ 1 Answers ]

Hi I am trying to find out what could be cause my washer to be draining its water during the agitate period. When it is suppose to be shaking and washing the clothes it is draining the water and by half way through the agitate process there is no water left in the washer. What could be causing...

Whirlpool Washer Ultimate Care II [ 1 Answers ]

Our Whirlpool washer has developed a strong, musty odor. We think it is coming out of the hole in the agitator. Can the agitator be taken off? What could be making a strong smell? I have tried running clorox through, and it doesn't seem to help. Thanks

View more questions Search