Ask Experts Questions for FREE Help !
Ask
    Cwheeler86's Avatar
    Cwheeler86 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2007, 11:50 PM
    Whirlpool Ultimate Care II LSQ9010PW6
    Hi I am trying to find out what could be cause my washer to be draining its water during the agitate period. When it is suppose to be shaking and washing the clothes it is draining the water and by half way through the agitate process there is no water left in the washer. What could be causing this.
    LeeF28's Avatar
    LeeF28 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 2, 2009, 01:51 AM
    Your drain pipe is too low from the washer tub. Try raising it to the height of the washer base.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Ultimate Care II washer will not drain [ 13 Answers ]

The washer runs through the wash cycle but when it is suppose to drain it does nothing. There is no hum just dead. I drained the tub out and disconnected the hose from the back thinking the drain was plugged. But when I did this the rest of the water from the tub drain out no problem. I'm...

Whirlpool Washer Ultimate Care II [ 1 Answers ]

Our Whirlpool washer has developed a strong, musty odor. We think it is coming out of the hole in the agitator. Can the agitator be taken off? What could be making a strong smell? I have tried running clorox through, and it doesn't seem to help. Thanks

Whirlpool Supreme ultimate care washer Model LSR8233E [ 2 Answers ]

My washer will fill with water, agitate and then just stops after the wash cycle. It is sitting here now full of water & clothes. Thanks for any help

Whirlpool Ultimate Care AL5143VW0 stalls [ 2 Answers ]

My Whirlpool will fill and agitate then stall before it drains and spins. It is so frustrating to go switch clothes to the dryer and the washer is still full of water. This happens most of the time on the first spin sometimes on the second spin and sometimes not at all. I am going to replace the...

View more questions Search