Ask Experts Questions for FREE Help !
Ask
    GreggP's Avatar
    GreggP Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2012, 05:21 PM
    Removing rear panel inside Maytag freezer
    I have a Maytag Model RSW24E0D. What is the best way to remove the rear panel to unclog the freezer drain line?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jan 2, 2013, 10:30 AM
    Unplug it and remove the screws and it should be easy, but to unclog the freezer drain you need to remove the cover to the evaporator and blow out the drain at the base of the coils in freezer. Here are some manuals: https://dl.dropbox.com/u/8010163/May...rigerators.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag fridge freezer interior panel [ 3 Answers ]

Can anyone please tell me where I can purchase the plastic interior freezer door panel on a Maytag double door fridge freezer. The panel need not be new but must be in good serviceable condition. Mine hasthe basket fixing holes cracked and now too large to hold the basket (only one broken). ...

Maytag fridge/freezer frost inside [ 2 Answers ]

Ok so this is probably a dumb question, but I'm going to ask anyway. I have a maytag fridge on top freezer on bottom. The coldest temp setting for both is 7. My fridge is at 4 and my freezer is at 5. I live in southeast Texas so the weather is up and down. One minute it's cold, next minute...

My maytag model no MSD2456DEB has a thick build up of frost on rear wall of freezer [ 0 Answers ]

The freezer works fine but the fridge side is warm , I also checked the rear of the unit and see a fan working and here an on and off clicking once in a while and once it clicks on it clicks off about 5 seconds later the black canister seems to be very warm !

Rear panel replacement on Maytag washer MTW5700TQ0 [ 1 Answers ]

I replaced the drain hose on my Maytag MTW5700TQ0 washer. The rear panel was very difficult to remove because of two clips that slide up into slots on the back panel and hold it tight to the frame. This mechanism seems to hold the entire frame together. I now need to move the washer to a new...

Inside rear door panel, 1999 lumina [ 2 Answers ]

I need a diagram or detailed instructions for removing the rear inside door panel on a 1999 Chevy Lumina. I found 3 screws and I know the rest is installed using either plastic or metal clips. I just need to know the approximate location of these clips so I don't tear up too much. Thanks in...

View more questions Search