Pilot lite is on and staying on

Check out some similar questions!

Furnace light up and stay lite for 3 min, pilot want stay lite, change thermalcouple [ 0 Answers ]

My furnace pilot would not stay lite, changed the thermcouple but pilot would still not stay lite, i installed a new gas valve, now pilot will stay lite until the unit lites up the furnace unit will come on and pilot goes out and unit stays on for about 3 min and then i hear a click and the furnace...

How to lite the pilot on my furnace? [ 0 Answers ]

I have a heatmaster furnace by westbrook distributing. I need to lite the pilot to get the heat working. The model # is HAC075NS3R. The serial # is 860626216. The PT # 1343122850. 75K BTU. Please advise. Thank You, David Green

Pilot will lite, burn, cycle, and go out [ 1 Answers ]

Pilot was out, lite and furnace seemed fine until next day. Relite pilot went out next day. Changed thermcouple, worked and went out. Installed electronic ignitor, lite and went out. Installed new gas valve same MO. Checked gas pressure ckecked for clogged duct and flu they were all fine. What's...

Pilot will not lite [ 1 Answers ]

The pilot will not lite on a robertshaw 7200ercs uses L.P. gas I have use this furnace for the past 5 years and I have lite the pilot before and I followed the instructions . I held the valve in he set position for a minute to bleed off any air that may be in the line but it still will not lite I...

Pilot not staying on [ 1 Answers ]

OK. Every time I light the pilot it will saty on for a few minutes and goes off. I talked to a friend and he said it could be the thermocooper or something like that but wasn't sure also. Just wandering if you guys might have an idea or agree with him.

View more questions Search

Check out some similar questions!

Add your answer here.