How to lite the pilot on my furnace?

texasleo77 Posts: 1, Reputation: 1

New Member

Nov 15, 2010, 12:28 PM

How to lite the pilot on my furnace?

I have a heatmaster furnace by westbrook distributing. I need to lite the pilot to get the heat working. The model # is HAC075NS3R. The serial # is 860626216. The PT # 1343122850. 75K BTU. Please advise.

Thank You,

David Green

Check out some similar questions!

Trane gas furnace Auto Pilot lite won't come on? [ 0 Answers ]

Trane TUE060A936HI Ser K 412MYH@G The gas is on; the thermostat is on, the fan for the furnace kicks on when I turn the thermostat up. But the auto pilot light will not turn on. I don't smell any gas? Any suggestions

Lite a pilot light on a gas furnace? [ 0 Answers ]

I rent a older home which has a milwaukee thermoflo furnace, not sure about the year it is faded. Just need to lite the polite, so we can have some heat.

Furnace Pilot Lite gas [ 1 Answers ]

I Turn to pilot and hold down the button from 3 to twelve minutes when released it goes out.

Pilot will not lite [ 1 Answers ]

The pilot will not lite on a robertshaw 7200ercs uses L.P. gas I have use this furnace for the past 5 years and I have lite the pilot before and I followed the instructions . I held the valve in he set position for a minute to bleed off any air that may be in the line but it still will not lite I...

Old American standard furnace pilot lite going out! [ 3 Answers ]

Will a universal thermocoupler work on it?. The one on there now seems to be a connected by a braided metal covered wire and connected to a power bar of some type.. . then a wire runs off the power bar to the 5/16 fitting... seems as though a universal honeywell thermocoupler would run direct from...

View more questions Search

Check out some similar questions!

Add your answer here.