 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Luxaire troubleshooting
Furnace won't stay on after pilot light turns off, problem seams to intermitting because it was working eariler today. The system cycles through a series of a "glowing rod" I assuming is the piolt light, then you here a trigger and the gas is released it runs until second trigger kills the pilot light which kills the gas this cycle happens 2 to 3 times, then system shuts off and has to be reset from thermostat
|
||||
Check out some similar questions!
Luxaire heat pump.hp fan won't come on in heat or them heat mode.works in ac mode thou..
I have a luxaire 410a system with a heat pump. It's one year old. The problem is that it's not cooling sufficiently. I'm only getting 8 degrees temperature drop across acoil. I've checked the high and low side pressures off the compressor and they seem to be reading correctly. I then went into...
Within the last couple of days, the blower will not shut off. You can hear it shut off momentarily and within a second or two turn on again. I am able to shut the actual heat off using the thermostat, but that does not affect the blower. I can turn the entire unit off using the switch on the side...
I am in the third heating season with my Luxaire system. One of my units stopped blowing air and if I swith it to manual, it still does not initiate the blower. The burners fire up and burn for about a minute but the blower does not start and the burners shut off. What controls the blower...
Preasure switch stuck open how do you get it unstuck
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
