 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hello. I am hoping somecan can give some ideas for a fix. I just had a brand new Luxaire 95% + gas furnace installed in my home. Intermitantly I get the 4 red flashes error, the heat turns off and the blower stays on. Sometimes it corrects itself and fires up again while attempting to satisfy the...
I have a luxaire 410a system with a heat pump. It's one year old. The problem is that it's not cooling sufficiently. I'm only getting 8 degrees temperature drop across acoil. I've checked the high and low side pressures off the compressor and they seem to be reading correctly. I then went into...
Our luxaire is a high efficiency model and frequently will shot off before the requested temperature is reached. We just had the "Initiator Motor" (power vent motor) replaced because it seized up. I thought the issue was related but it is not. The problem happens several times/day. If I shut...
Preasure switch stuck open how do you get it unstuck
My LuxAire furnace runs intermitently but sometimes just cuts off and doesn't start again, then if I cut off the power and reconnect it the furnace starts for awhile. I am getting a code of seven blinks. It seems to run for awhile but nothing is consisitant? Please!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
