Ask Experts Questions for FREE Help !
Ask
    Lawncare's Avatar
    Lawncare Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 22, 2012, 09:47 AM
    Auger won't turn
    The auger that throws the snow in the chute works but the other one doesn't on our snow blower
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Dec 22, 2012, 10:22 AM
    Make and model number?
    Lawncare's Avatar
    Lawncare Posts: 3, Reputation: 1
    New Member
     
    #3

    Dec 22, 2012, 10:41 AM
    It is a John Deere but I don't know the model number. It is a 4 hp.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #4

    Dec 22, 2012, 02:50 PM
    The impeller is what throws the snow out the shoot. If I understand correctly that part works. The auger is the part that pulls the snow into the housing. Again if I understand correctly that is what is not working.

    The auger will have shear pins, one for each side of the auger. These connect the auger to the shaft inside that is turning. These are designed to break or shear off if (when) you hit a rock or some other object that would damage the machine).

    Shear pins will probably be about the size of 1/4" bolt. Will look like a small bolt going through the auger shaft.
    Lawncare's Avatar
    Lawncare Posts: 3, Reputation: 1
    New Member
     
    #5

    Dec 22, 2012, 03:20 PM
    We checked the pins and they are not broken.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Auger won't turn on whitfeild pellet stove all the time [ 0 Answers ]

There is a vacume hose at the end of the exhaust fan . When the hose is dissconected and pencil shoved in it ,we can get the auger to start turning to get pellet stove running. When we rehook the hose back up to the exhaust fan it stops the auger. What is the problem? Bought a whitfeild in 2000 ...

Auger in Traeger pellet stove won't work. [ 1 Answers ]

I have a Treager pellet stove a friend gave me. I'm sure it hasn't been used in a while. I cleaned it all out, put some pellets in the hopper and put some in the cylinder in the front, plugged the stove in, lit the pellets on fire in the cylinder, the fan comes on, the stove starts to smoke,...

Craftsman snow thrower auger does not release auger belt tension [ 2 Answers ]

I adjusted the auger cable tension on my craftsman 247.887000 to tighten a loose belt. When the auger bar is released however, the tension is not released so the augers continue to turn. Can I just lubricate the pivot point on the auger pulley assembly?

Heater won't turn on/if I manually turn it on the air is cool [ 0 Answers ]

Heater won't turn and if I do it manually it blows cool air

Toro 421. Right auger won't throw [ 1 Answers ]

Old toro 421. Right auger won't throw, spins freely. Left auger throws.


View more questions Search