 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The ignitor can not ignite
My carrier furnace:58sxa weathermaker has a intermittent electric ignitor which can not ignite the flame with spark present. And I can ignite it with a BBQ ignitor.
Can you tell me how to fix it? Did I place the ignitor's electrode in a right position? Thanks! John |
||||
Check out some similar questions!
Hi, I have a 50 gal Rheem PwerVent gas water heater (Model # 21VP50-1) which has started to act up. In past two months, I had to switch hot water heater off and on every few days in order for the main burner to ignite and have hot water. Since yesterday, however, that does no longer work - The...
What is the location for an ignitor on an amana furnace model # guc070c30c?
I have a 80MGF3 the circuit board was change out during the summer with a 19w94 ign conversion kit. The air worked find for the summer,but when the thermostat was place for heat the ignitor would not produce a spark. The inducer fan comes on, the gas valvue opens, the ignitor tries to ignite, but...
I have a Trane unit and the ignitor does not produce a flame. The unit's blower runs and keeps the house at 62 degrees, 29 degrees outside. I have had this same problem once before and I was told that all that was needed was to clean some part in the furnace. Do not remember what that part was. ...
I have a intertherm honeywell furnace about 6 years old and the ignitor will not ignite so furnace will not turn on... I put in a new ignitor in but still will not ignite... Is anybody out there familiar with this problem and can direct me in the right direction... Thank you very much... Paul
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
