Check out some similar questions!
I have an armstrong sx ultra 80 gas furnace the pilot is lit but the burners will no
[ 4 Answers ]
I have an armstrong sx ultra 80 gas furnace the pilot is lit but the burners will only come on when I take the door off till they light and then I put the door back on once the temp reaches the level on the thermostat it will shut off it will not come back on when the temp drops until I go and do...
Old Armstrong Furnace. Pilot lit, burners won't
[ 4 Answers ]
Yesterday AM the breaker for the furnace kept tripping. I opened it up and noticed that the wire running to the limit screw on the limit switch had melted to the furnace. I removed the wire and ran a new one. Now the fan runs but the burners won't. Any ideas?
Furnace burners will not turn on, but the pilot is lit.
[ 6 Answers ]
I turned on the heat for the first time this season and no heat came out. I checked the furnace and the pilot was out. I lit the pilot and it stays lit (been on for over a day now.) I tried the heat again and still nothing. So, the furnace is getting power, the fan works when "ON." The pilot...
Gravity furnace pilot is lit but burners aren't working
[ 14 Answers ]
I have two large gravity heaters - the kind with asbestos octopus ducts - in my basement. They were made by Pacific Gas Radiator Company (Huntington Park, CA). The pilot lights but the burners do not fire. I try to clean them out each year, but I have the problem repeatedly. On the other unit, the... View more questions Search
Add your answer here.
|