Ask Experts Questions for FREE Help !
Ask
    Andrew W's Avatar
    Andrew W Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2012, 05:07 PM
    Pump startd stop in ntervule never pumps up to pressure
    Pump starts stops quickly never pumps up
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Dec 11, 2012, 06:35 PM
    Check your pressure tank as it could be waterlogged. There is a little air valve at the top. Press the valve stem for a few seconds. If water comes out, then your tank has problems and should be replaced. A little more detailed explanation can be found here.

    Bladder Type Water Storage & Pressure Tanks - Diagnosis & Repair
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

When the pump recharges it trip the pumps switch out. [ 1 Answers ]

I just replaced my tank, with a new 30/50 switch. I have a neutralizer and now when it recharges it trip the pumps switch out. This never happened before and it is piped the same. I did increase the size of the bladder tank and di d not ck the pressure initial from new.

1/2/HP craftsman jet shalllow well pump only pumps to 25 psi & won't shut off. [ 3 Answers ]

My pump pumps to about 25 psi & won't get any higher. Holds it's prime. PSI switch is per set to 40/60 & new. Air in tank checked around 25 when -0- psi on gage. Pump is maybe 3 years old. Thanks

Calculation of cold water trasfer pump and booster pumps [ 1 Answers ]

Sir, I need to know how to calculate the power and head of cold water transfer pump and cold water booster pumps. How to calculate the various heads like friction head, discharge head,static head and suction head.can u please send me the calculations done for that briefly My e mail id is...

Who can tell me what's the purepose of 2 psi bellow pump presures in well pumps? [ 2 Answers ]

I just changed the pump tank the pre set pressure is 100 psi and the pump gage reads 50 psi and the water is running fine will it make my pump break down if I don't lower the pressure?

View more questions Search