Ask Experts Questions for FREE Help !
Ask
    jithinvp's Avatar
    jithinvp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 9, 2009, 11:49 PM
    Calculation of cold water trasfer pump and booster pumps
    Sir,
    I need to know how to calculate the power and head of cold water transfer pump and cold water booster pumps. How to calculate the various heads like friction head, discharge head,static head and suction head.can u please send me the calculations done for that briefly

    My e mail id is [email protected]
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 10, 2009, 05:44 AM
    Give us the suction and discharge pipe size and the length of both pipes. How much lift ts required? Are you asking this for a installation or is this a test question?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Distance between pumps calculation [ 2 Answers ]

Hey. I've been searching the internet and some bibliography but I still haven't found clear info about how you calculate the distance between 2 pumps in a pumping system, so far I've found that it relates with the NPHS but what I've read just confuses me more. Anyway, thanks for any help :D

Booster pumps [ 1 Answers ]

Advice me, I am working as Project Consultant Engineer, I recommended 3 Booster pump set for Water distribution network, Low demand first pump working, high demand first and second pumps working and 3rd pump standby, I am using pressure tanks also. But contractor recommending only one pump of...

Water meter vs. Booster pump [ 1 Answers ]

In 2005,I had a booster pump install to increase the water pressure in my house. Every since I had the booster pump installed, I have been getting outrageous water bills, not that much greater water pressure and my water meter becomes broken every year for last three years. What do you think the...

Pool pump and booster pump timer diagrams [ 2 Answers ]

I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts

Booster pumps and PRV install [ 1 Answers ]

Hi, I have a question about installation of a booster pump to a city water supply that has 38 to 40psi. The manufacture of grundfos and davey pumps require a Pressure regulator to be installed not to excide 30 psi.Do most cities require or have any codes to support this?and inspect it? I live in a...

View more questions Search