 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Erie Boiler Boss controller
I have an Erie boiler Boss controller Model MR31 with priority zone. The only zone that will heat on cold nights is the zone designated to priorty zone 1. Is there a way to shut off the priority option or a different way to wire thermostats. I have an outdoor wood boiler that is suppose to heat 5000 sq/ft for a 2000sq/ft home. If I turn down the thermostat for the priority zone my other zones will heat no problem.
|
||||
Check out some similar questions!
When you open the BACnet object list on the BIC II the Operating Status object XXMV1001 and Error Message object XXMV1002 come through as words. But when you poll them from your BACnet device they come through as NUMBERS. Is there a cross reference document for them that can be used for...
I have a amana 70,000 BTU dc motor furnace.I need to know how to wire a erie 3-way zone valve.I am going to put a outside wood boiler in with a heat exchanger on the furnace, it is a counter flow.when the furnace call for heat the zone valve open and the motor ramps up to high speed. Then when it...
I can't get on the internet because my network controller and my ethernet controller have no drivers, therefore, no connection is made. I cannot update the drivers because the software can't be found in my computer and I can't go onto the internet to retrieve it with my laptop. Whenever I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
