 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman furnace red led light don
Goodman gas furnace. The red status led don't come on at all. It has power to the circuit board, to the fuse, to the transformer. Continuity is good from the plug at the board through out the rollouts. The exhaust fan works when you shoot power directly to it. I'm not a furnace guy, but I'm thinking it's either a bad gas valve or a bad board. Please help.
|
||||
Check out some similar questions!
Installed new goodman furnace. Blower turns on, igniter comes on, but no ignition. Gas is to the regulator, LP gas; switched jets, put silver springs in, set turns on lo-hi at 8 turns and 12 turns. Any suggestions?
My Goodman furnace won't light after working fine after I cleaned the burners. Poor thing sat about 4 years without use. I just switched propane tanks and used the same tank as I had before and now it won't light. ED
Hi, my name is mo from Arizona, my Goodman Model PGB furnace would not light. Pulled out the spark ignitor, flame sensor, ckecked voltage at gas valve, pulled out fuse, all of these parts looked and checked out OK. Turned the power on and the furnace worked fine. Remembering the LED was blinking...
Eleven year old Goodman gas furnace. The main vent blower will start, but that's where things end. The draft inducer motor doesn't start and nothing else in the chain obviously happens after that. The LED on the board stays red and never flashes any codes. I checked the voltage coming into...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
