 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman Evcon Troubleshooting
I have a Coleman Evcon furnace model BGU12520A that is not coming on when thermostat is calling for it, if I turn main switch off than on it fires up. Is there a sensor that could be bad? It worked fine before we lost power during huricane Sandy.
|
||||
Check out some similar questions!
The regulator clicks and the furnace does not light.
Coleman furnace referenced in subject line ignites, getting gas, blower starts, runs for a couple minutes, unit shuts down, red LED light on board blinks ten times. Anyone know the code for this repair? I'm FREEZING! :(
I have a coleman evcon direct vent forced air furnace (gas with electric ignition). The motor runs, but it does not ignite. The blowers work fine on fan mode but will not ignite or blow on auto. Any suggestions?
Our furnace is running, pumping warmish air. The thermostat is set at 68*, but our furnace doesn't seem to be able to heat our house over 61*. I've turned the thermostat and the furnace off and back on (the only troubleshooting I know!) with no results. It's a coleman evcon G FD024517A.
I have the coleman evcon electric furnace -- the blower works -- but doesn't put out much heat -- rather warm not hot - the unit may be in need of cleaning not sure -- or is there a part that may need replaced.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
