Ask Experts Questions for FREE Help !
Ask
    iymawingnut's Avatar
    iymawingnut Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 30, 2012, 12:34 AM
    Replacing belt on a Husky Air Compressor WL651001AJ
    Looks difficult to get a new belt on.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 30, 2012, 10:47 AM
    Hi,
    In looking at the parts breakdown for that model, I ask what belt?
    Peace,
    Clarke
    iymawingnut's Avatar
    iymawingnut Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 30, 2012, 05:32 PM
    The belt I asked about, goes from the piston pulley to the motor shaft. All of this is under the plastic cover, where most people don't go looking around.
    Imprinted on the belt is "Made in France" ,
    "Replace with Genuine Part BT 011900 AV",
    And the numbers "1 304".

    The old belt has snapped/broken/torn

    Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Dec 1, 2012, 12:48 PM
    Hi,
    One of the problems is that Campbell Hausfeld has a unitized machine by almost the same model and I keep getting breakdowns for it. The belt number helped immensely. With it I find a service bulletin and a belt kit at Sears at:
    http://www.searspartsdirect.com/part...900AV/0009/106
    Peace,
    Clarke
    PS The motor or the compressor, on or the other is liable to be mouted in slotted holes.
    Attached Images
  1. File Type: pdf read-first-service-bulletin-march-2001.pdf (22.5 KB, 454 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Florida requirements for replacing air handler and compressor [ 1 Answers ]

My old central a/c stopped working. I was told that the old compressor would have to be replaced but that Florida law requires that I replace the air handler too. Is that true?

Heating air conditioner vibrates after replacing the compressor and capacitor [ 0 Answers ]

Amana HVAC unit, 11 years olds vibrating. It has never done this before. Just had a compressor and capacitor installed. Sounds like something is loose. What could it be. May damage the $1350 work that was just finished. BLPREAL

Husky Powerwasher 1750 (replacing On/Off switch) [ 3 Answers ]

Ae there Schematics to replace the switch, it got popped off from the leads and I don't know where the leads go to on the switch back I got 4 leads and 4 colored wires. Which go where?

Compressor won't start after replacing blown fuse [ 1 Answers ]

I had a blown fuse in my Janitol furnace that caused my entire system to not function. Once I replaced the fuse, everything worked except for the compressor.

Replacing heatpump compressor [ 1 Answers ]

I just got an estimate for replacing a compressor for my heat pump which is still under warranty. The qoute I got was 900.00 and was told others would charge 1300.00. I can't help but be a little skeptical does this sound reasonable. This price is all parts and labor and recharging the unit.

View more questions Search