 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sears Tractor Troubleshooting
Ordered and got right belt for drive pulley on sears garden tractor tried to install too short when tractor was purchesed new I was given a different belt and pully to install when using a snowblower need to know if any bulletons out about this or what to do and no I don't have smaller pully to put on
|
||||
Check out some similar questions!
Troubleshooting Sears LT with a 17.5 2006 B&S Engine.Unit won't start. Isolated problem to fuel solenoid on bottom of carb. How is the solenoid wired into the system? Is there an interlock safety switch that might be the culprit?:confused:
My Sears LT model 917.271041 is not getting gas from the fuel tank to the carb. I have replaced the fuel line, the fuel filter and added a fuel shutoff switch. When fuel line is disconnected at the carb, fuel flows freely, but when reconnected and engine is started I notice the fuel filter will not...
I have a 17hp 42" craftsman lawnmower, which is about 6 years old. After I mowed and the mower cooled down, I started the engine, but the speed kept pulsating up and down without moving the throttle (despite the position of the throttle). Now the mower pulsates and backfires when I first start it....
I have a sears 917273170 tractor and I need to locate the interlock switches for the brake/clutch
I have a sear B&S lawn Tractor, It starts and Runs Fine as long as t I have the clucth pushed in. If I release the clutch or try to engage the blade, it dies. Even if it is in nuetral. Does anyone one know why.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
