Ask Experts Questions for FREE Help !
Ask
    Rgomez316's Avatar
    Rgomez316 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 27, 2010, 08:39 AM
    Sears lawn tractor troubleshooting
    I have a sear B&S lawn Tractor, It starts and Runs Fine as long as t I have the clucth pushed in. If I release the clutch or try to engage the blade, it dies. Even if it is in nuetral. Does anyone one know why.

Check out some similar questions!

Troubleshooting Sears Lawn Tractor [ 10 Answers ]

Troubleshooting Sears LT with a 17.5 2006 B&S Engine.Unit won't start. Isolated problem to fuel solenoid on bottom of carb. How is the solenoid wired into the system? Is there an interlock safety switch that might be the culprit?:confused:

Sears lawn tractor troubleshooting [ 1 Answers ]

I have a sears 917273170 tractor and I need to locate the interlock switches for the brake/clutch

Sears Lawn Tractor [ 2 Answers ]

How do I adjust the blades. One side cuts lower than the other?

Sears lawn tractor [ 4 Answers ]

Engine will not start, turns over very weakly with a fully charged battery. When the spark plug is removed it turns over very well. Put the plug in and it does not turn over. Sometimes you can tip off the spark plug with gas and it will crank right up?? Engine will not start, turns over very...

Sears lawn tractor [ 3 Answers ]

Can some one tell me how to replace belt on sears ss/16 twin lawn tractor this is a older mower.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.