 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
T841A101 thermostat to a RTH3100c Where does the brown wire from terminal x go and
Going from a Honeywell T841A1001 thermostat to a Honeywell RTH3100C. Where does the brown wire (old terminal X) and the white wire ( from old terminal W3) go on the new thermostat? Thank you Chuck
|
||||
Check out some similar questions!
How to wire in a thermostat on a Bryant furnace, on the control board I have terminals W, Y, R, C for 24 volt common & G and on the thermostat I have terminals W, Y, R, G. Thank you Tom.
Wire diagram to switch from a simple comfort 2200 to a rth3100c
I just replaced an old Honeywell mercury thermostat with these series of letters and numbers on the inside: HB2 T222A 1012 1 with a new RTH2300. There were 3 wires in the old thermostat, red connecting to R, white connecting to W, and a green wire connecting to B. Where do I put the green wire in...
I bought a new Honeywell RTH3100C thermostat. The old thermostat had a white wire looped around both E and W2. What do I need to do?
Hi. I'm trying to install a Honeywell RTH7600 programmable thermostat. I've detached my old thermostat, and I'm trying to figure out how to match up the wires. It's heat and air conditioning, and the old thermostat was a pretty basic, older round variety (also honeywell). Problem is that I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
