Ask Experts Questions for FREE Help !
Ask
    mike271984's Avatar
    mike271984 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2011, 05:23 PM
    How to wire a honeywell rth3100c thermostat from a simple comfort2200
    Wire diagram to switch from a simple comfort 2200 to a rth3100c

Check out some similar questions!

Wiring Honeywell RTH3100C thermostat [ 2 Answers ]

I replaced my old mechanical thermostat with a Honeywell RTH3100C digital. My heatpump is an older Rheem. My wires are RED,YELLOW,GREEN, WHITE AND WHITE1. I connected the red,green,yellow to their respective terminals. I don't know what to do with the White1. The blower comes on and with the White...

New thermostat Honeywell RTH3100C old E and W2 same wire what can I do [ 6 Answers ]

I bought a new Honeywell RTH3100C thermostat. The old thermostat had a white wire looped around both E and W2. What do I need to do?

Honeywell rth3100c Thermostat [ 1 Answers ]

I am trying to change from a White Rogers thermostat to a Honeywell rth3100c. The old thermostat has a blue wire on X1 and a tan wire on E. Do both of these go on the E terminal on the honeywell?

A different Honeywell RTH3100C installation question - W2 wire? [ 1 Answers ]

"What to do with the W2 (and maybe W1) wire?" I am replacing an old Payne thermostat that controlled a heat pump system which provides heating and cooling, along with "emergency heat". The new unit is a Honeywell RTH3100C. I labeled all the wires as I removed the wires that were attached to...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.