Craftsman mower stalls when put in gear or engage blades, why?

sanford16 Posts: 1, Reputation: 1

New Member

Nov 13, 2012, 04:00 PM

Craftsman mower stalls when put in gear or engage blades, why?

Craftsman mower stalls when dut in gear or engage blades, why?

Check out some similar questions!

John Deere 111 lawn mower stalls when blades engage [ 2 Answers ]

This mower starts and runs fine, but when I engage the blades, it stalls. The seat safety switch has been disabled. The belt is on correctly. Any help would be greatly appreciated.

Craftsman mower won't engage blades [ 1 Answers ]

When I pull the pto switch to engage the blade the engine will shut down.blades turn freely by hand. Acts as if there is safety switch grounding out. Seat switch still works but can't figure it out.

Craftsman mower blades won't engage [ 1 Answers ]

Have a 42", 21 hp Craftsman Bob Villa mower and when you pull the PTO switch out it kills the engine. If you slowly pull it out the blades will engage as long as it stays in same position, you can't pull it all the way out or it will kill the engine. Have replaced the PTO switch, same results. ...

Craftsman 50" Rider Stalls When Blades Engage [ 1 Answers ]

Mower has a 20 hp Kohler motor, is 13 years old, and very well maintained. New deck assembly this year. Teenage son runs mower out of gas. He puts gas in but it won't start. I assumed it may have sucked up some trash when it ran out of gas. I got it running again by changing the fuel filter,...

View more questions Search

Check out some similar questions!

Add your answer here.