 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Code 21 on my carrier 58MC furnace
I can re start the furnace by power it off and on again. The repair technician told me it could be stuck gas valve relay on the control board. Where can I buy the board in Hamilton Ontario and is there any body had any luck with a new board,thanks
|
||||
Check out some similar questions!
I am getting a code 21 so I tried cutting power and when power is restored I activate the furnace. Right before the blower comes on I can hear a click. To me it appears the thermostat is answering the call but once the furnace comes on (blower starts blowing) it never fires up the gas.
I have a Carrier and the furnace and the heat will not come on. The fan does come on but the burners will not ignite. I get a red flash code of 2 short and one short. I have the same thermostat upstairs and I switched them and the same result. The upstairs works fine with both thermostats. I have a...
The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?
Hi. I have a Carrier gas (propane) furnace 58MCA100-11116 series 111. It shows a code 31. The evacuation blower runs for a short time then kicks off. The burners do not ignite. To date I have: replaced the pressure switch, checked in and out lines to the pressure switch for obstruction,...
What does a code 34 mean on a carrier furnace?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
