Ask Experts Questions for FREE Help !
Ask
    beauman's Avatar
    beauman Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 26, 2012, 02:08 PM
    I am getting a code 21 on my Carrier Furnace
    I am getting a code 21 so I tried cutting power and when power is restored I activate the furnace. Right before the blower comes on I can hear a click. To me it appears the thermostat is answering the call but once the furnace comes on (blower starts blowing) it never fires up the gas.

Check out some similar questions!

Carrier furnace with a red flash code of 2 short and 1 long code [ 2 Answers ]

I have a Carrier and the furnace and the heat will not come on. The fan does come on but the burners will not ignite. I get a red flash code of 2 short and one short. I have the same thermostat upstairs and I switched them and the same result. The upstairs works fine with both thermostats. I have a...

My carrier furnace LED light is flashing a code. How do I tell what code it is? [ 1 Answers ]

The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?

Carrier gas furnace code 31 [ 3 Answers ]

Hi. I have a Carrier gas (propane) furnace 58MCA100-11116 series 111. It shows a code 31. The evacuation blower runs for a short time then kicks off. The burners do not ignite. To date I have: replaced the pressure switch, checked in and out lines to the pressure switch for obstruction,...

What does a code 34 mean on a carrier furnace [ 1 Answers ]

What does a code 34 mean on a carrier furnace?

Carrier Condensing Gas furnace Code 23 [ 2 Answers ]

Have a Carrier Gas Furnace Model #58MSA. Has stopped working and code #23 comes up, which the owners manual states have service call. Live in area where service calls are hard to come by and am also a DIY type of person. Any suggestions. Thanks Steve


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.