Ask Experts Questions for FREE Help !
Ask
    yrddwn's Avatar
    yrddwn Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 10, 2012, 10:47 PM
    Carrier gas furnace model 58PAV no heat
    Hello, I just purchased this home I'm in and both of my Carrier gas furnaces are not blowing any heat. I had the home inspected and was on site when the home inspector tested the air & heat... both worked fine. While painting the inside of my home I removed the thermostats to paint behind them but replaced them correctly. Once the remodel was complete we moved in and the a/c worked great during the summer but the heater isn't blowing hot air. I've done as much research as possible but can't come up with anything. Both units say they are 58PAV's but one is larger than the other. The larger unit has a LED light but is always solid with no blinking for codes. The smaller unit does not have an LED light. Any suggestions?
    haug0099's Avatar
    haug0099 Posts: 3, Reputation: 1
    New Member
     
    #2

    Nov 17, 2012, 02:28 PM
    Is your thermostat switched to heat? Is your gas on? It's possible when you pulled your theromstat off the wall, you disconnected a wire on the back. That's all it would take

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier gas furnace 58PAV with no heat [ 0 Answers ]

Hello, I just purchased this home I'm in and both of my Carrier gas furnaces are not blowing any heat. I had the home inspected and was on site when the home inspector tested the air & heat... both worked fine. While painting the inside of my home I removed the thermostats to paint behind them but...

Ow to fix error 24 code on carrier model 58pav? [ 0 Answers ]

How to fix error 24 code on carrier model 58pav?

Carrier furnace 58PAV LED light [ 0 Answers ]

Our carrier furnace 58 pav led light is on, but not blinking, is this an issue or normal?

Carrier furnace 58pav no heat [ 0 Answers ]

58PAV - I just changed the ancient Honeywell mercury thermostat with a 5-2 progammable, the same one I put in my office. Now the da*n thing won't fire. The Statue Led is ON constantly, indicating a loss of 24V somewhere. I'm sure it is a fuse, but the only one I found is a 3A automotive type. ...


View more questions Search