 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
When I swtich my stat to them heat it won't switch over no red light
Replaced ignigter board and now thermostat and pilot not doing anything. 5 wires on right side of brd. Red and brown jumped together black coming off load line box and 2 dark blue wires need to know what order they go in.
My mother has a Coleman Evcon dgat090800 the problem is that the burner will light up on it and burn until the blower kicks on then the burner will quit I can test parts on it but am not positive what the readings should be can someone help.
What is Limit switch open fault code?
I have a coleman evcon furnace in my double wide. Yesterday it ran fine, today not so good. I can see the "glow plug" light up and then ignite the unit so there is flame and the blower motor turns on... but after a 2 minute run it shuts back down and the air is less then warm during that 2 minutes....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
