Check out some similar questions!
Old 3 speed fan switch has white, purple, blue, grey wires. How to connect?
[ 2 Answers ]
My old pull chain 3 speed fan switch has white, purple, blue, grey wires. New switch has markings L (black wire), 1, 2, and 3. How should I connect new switch to old wires?
Ceiling fan switch has black. Blue, purple, yellow
[ 0 Answers ]
Trying to replace the switch, the old switch has the black blue, purple and yellow wires, we paid specific attention to the location of each wire, and connected the new switch, now the fan doesn't work at all, no hum, zippo Thanks Tammy
Which wires connect with a zing ear ze 2082 and a harbor breeze fan. No light
[ 0 Answers ]
When the chain broke the fan got stuck on high speed. So I turned of the electric at the box and pulled the fan wires apart being careful to cap each one so they did not touch. Stupid me didn't pay attention to which wires connected where. My friend changed the switch but had to leave before he...
Where does the two gray wires conect. Inside the housing see one gray have 2 gry wire
[ 0 Answers ]
Replacing a fan capacitor in an outdoor harbor breeze 52 in fan w/light kit. Have six wire total all connect but one gray wire. Only see place for one gray wire to be connected; Where does the extra gray wire go?
Honeywell RTH221B help, Red Yellow White Yellow Green Blue wires?
[ 2 Answers ]
Hey I got a new thermostat for the house but went to replace the old one and I have a Yellow, Green, Red, White, and Blue wires but the thermostat has the Y, G, Rh, Rc, and W. An electrician friend hooked it up for me and did the following: Y - Yellow G - Green Rh - Red with a jumper to Rc W -... View more questions Search
Add your answer here.
|