Ask Experts Questions for FREE Help !
Ask
    capvideo089's Avatar
    capvideo089 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 7, 2012, 09:56 AM
    Model fbf100f14a4 BLOWER FAN
    The furnace fires up, but the fan never comes on. I tried flipping the fan switch on the THERMOSTAT CONTROL from "AUTOMATIC" to "ON", but still no fan action!

Check out some similar questions!

Heil fbf100f14a4 [ 4 Answers ]

I have a Heil furnace. I found the motor of draft inducer not work properly two month ago. After I took it off and put some machine oil, it worked well. I knew I need to replace a new inducer soon. I ordered a new one with the same model, and replaced it yesterday. The new inducer works well, but...

I have aHeil model #FBF100F14A4 [ 2 Answers ]

My heater will ignite then stay on for about 1-3 minutes then shut off and cycle through the ignition cycle 2-3 more times sometimes longer and eventually stay on. I changed the limit switch and cleared the pressure switch tube of any condensation but it keeps doing ot.

Have a GM Delco Model DSWT35WP need to get gase blower [ 0 Answers ]

It a GM Delco Boiler DSWT35WP I need a gas with blower part. It has a convention burner model P265F.

Model gmp blower mtr and induction mtr run all the time [ 1 Answers ]

When I close the door switch the blower and induction motor run all the time. The led flashes 4 times. Have checked limits, no open circuit found. The diaphram switch opens and closes at the proper times. Have tightened the neutrel all the way to the breaker pannel. What am I missing? Thanks, Clyde

Blower Bryant model [ 1 Answers ]

I have a Bryant furnace/air conditioning unit. The blower does not work. When the blower in turned on manual, the blower motor makes a humming noise but, the blower does not rotate. Can you assist in resolving the problem? Thanks


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.