Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can LED light bulbs be used with track lighting heads that use an electronic transfor
[ 1 Answers ]
I have purchased low voltage track lighting heads that have individual electronic transformes for MR 16 halogen 50W bulbs. Can I place MR 16 9W LED bulbs instead even though magnetic transformers are recommended? Thanks in advance
Hampton Bay EC Series Track Lighting System Eating Bulbs
[ 1 Answers ]
I have a Hampton Bay EC Series Track Lighting System that was installed when my home was built 9 years ago. I notice that I am changing bulbs more frequently than in the past. How can I correct this?
Non-working track lighting
[ 1 Answers ]
One of the lamps was working, one was not on a two lamp track lighting fixture in my kitchen. I purchased 2 new lamps (so they would match). After they were installed, neither one worked. We tested the bulbs, they were fine. What's really strange is that when we tried to install the old lamp...
Track lighting with 2 power sources
[ 3 Answers ]
Can one long track-light rail be connected to 2 power sources? With two on/off switches - the rail passes by 2 hi-hat power sources. We thought we could then use either switch to turn the lights on/off. Also, how many pendant lights would be safe to use on 3 attached 8' rails? Each rail comes...
Track lighting not working
[ 5 Answers ]
I have a Hampton Bay 7 light track light kit. Each of the 7 light fixtures on the track have a halogen 20W bulb in them. Recently, the power in my house went off for about 10 minutes. This happened at night, so all of the lights/ switches were off. After the power came back on, I noticed that... View more questions Search
|