Blower stays on and burner will not come back on after initial start

kacybandit17 Posts: 2, Reputation: 1

New Member

Nov 3, 2012, 09:47 AM

Blower stays on and burner will not come back on after initial start

HEIL furnace, the first cycle of coming on is fine however fan will not shut off and burner won't come back on after reaching temp even after turning stat up higher

Check out some similar questions!

Hot water heater pilot stays lit till burner comes on [ 0 Answers ]

Hot water heater can light pilot light and it will stay lit turn burner on and burner will light for a few minutes about 2min then I hear a click and the hole thing shuts down any ideas

Pilot stays on, burner is on but very low flame and hot water is gone. [ 0 Answers ]

Blower turns on and off burner stays lit. [ 0 Answers ]

"I have a Inter therm natural gas furnace. the blower turns on and off but the burner stays on. if i turn the heat up about 5 degrees higher it will stay on . but when it shuts down the blower will start and stop about every 45 seconds. this will last about 10 minutes. any help would be great"

Gas furnace burner only stays light with front cover removed [ 10 Answers ]

I have a HEIL gas furnace located outside my house,I found that with the front panel removed it operates perfectly,however with the panel in place as normal the burner will light but will go out. Once I remove the panel I hear the gas valve click and its running perfect. I replaced the pressure...

Burner indicator light stays on [ 1 Answers ]

I have a whirlpool RF315PXKQ0 range/oven I was cooking on the back right burner and there was a LOUD POP as obviously the element shorted out and the circuit for the range tripped. Disconnected and reconnected everything and threw the circuit breaker to ON and it stayed on OK. All burners, oven,...

View more questions Search

Check out some similar questions!

Add your answer here.