 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman furnace overflow pump
Just need confirmation before proceeding. The external overflow pump keeps running which tells me that the internal float switch is not triggering the pump to turn off. So that can only be one thing... the water level isn't dropping in the tank which means a clogged line. Problem is that the line goes up through my ceiling. My question: Can I just run a new line from the pum instread of tearing into my ceiling? Makes much more sense. By the way... should I install a one way check valve in the line to keep the water from backing up on the pump?
Sorry about any typing error... on my way out the door. Thanks for any assistance yopu can give me... Ultramandude |
||||
Check out some similar questions!
I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great
On my 15 yr old Goodman GMP050, the preigniter stays hot orange even after the furnace cycles properly. I've sanded the flame sensor and the igniter but it still stays on till I shut off the electricity at the furnace. Any thoughts? It's COOOOOOLLLLLLDDDDDDDDD!
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Me and my wife just bought this house,the fella we bought it from had a new furnace installed it's a goodman electric heat pump furnace,it's still under warranty,but instead of calling and having to wait on someone to come out to the house I would like to fix myself,I set the thermostat at 72 but...
I am shopping for a new HVAC system, have received a quote that sounds very good but I have never heard of a Goodman system. I trust the local dealer. What is the general feeling about Goodman products? My house is about 1250 sq ft, furnace proposed is 90,000 BTU Heat Pump is 14 SEER, located in...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
