Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Setting the timing on a 2000 blazer
[ 3 Answers ]
I'm trying to set the timing and it shows to put the #4 cylinder top dead on the compression stroke.how do I tell when I'm on the compression stroke?
2000 Blazer won't start, but cranks over strong.
[ 2 Answers ]
I had a very similar experience with my 2000 Blazer. It would crank over strong, but wouldn't start. I disconnected / reconnected battery after 15 seconds, and it started right up. I have done this twice now successfully. But now on the way home, it died 3 times. And it did restart each time...
2000 S10 Blazer ac
[ 1 Answers ]
2000 S10 Blazer, 135,000 miles. AC problem. Low side reads 45. Shows equalization after it sits. Pressure rises to 100 on low side. Compressor comes on, clutch pulls in. That part seems good. Have added freon, then stop leak, a little oil. Released some of the pressure on the low side after...
2000 Blazer hard to start in the morning.
[ 2 Answers ]
After sitting for awhile (such as overnight) my blazer starts, but only after cranking on the starter several times for considerable duration. Sounds like a fuel problem, huh? I haven't changed the fuel filter yet, nor have I checked the fuel pressure. How much should the pressure read? During...
Brakes lights staying on 2000 blazer
[ 5 Answers ]
I have a 2000 blazer that the brake lights are staying on after I start it.I have replaced the brake swicth and it fixed it for 1 day,then it started all over again.also I can pull the key out of it and touch the brake and the radio and power windows will work .any help :)you can give me would be... View more questions Search
|