Ask Experts Questions for FREE Help !
Ask
    hermsen's Avatar
    hermsen Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 31, 2012, 01:52 PM
    Power outage, furnace will not start.
    Had power outage this week, out for 12 hours. When I came home from work furnace was not working, went and flipped switch for furnace to off, check the circuit breaker, check the thermostat. Everything seem fine. Turned on the switch for furnace, also thermostat, could hear the clicking for a little but the usual sound of the furnace igniting did not come, clicking continued a little more. Also, on my 14 year old lennox furnace I could see a fast flashing green light, none of the material given to me when I brought furnace suggest what to do other then call service repair man. What would be something I check before I have to call repairman

    Thank you
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Oct 31, 2012, 07:50 PM
    Often there is a key to the blink code on the inside of the blower door.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help with a furnace that hasn't worked since a power outage [ 2 Answers ]

I have a Goodman furnace that is relatively new, and it was working properly until we had a power outage. Now all I get is cold air blowing. Help me please, we are freezing in Ferndale, Michigan. What do I need to do? I checked the fuse box, and all circuits are on.

Homart 867 Gas Furnace won't work after power outage [ 10 Answers ]

I have two Homart 867 Gas furnaces. After a lengthy power outage yesterday they won't turn back on. I was able to manually light the pilot and switch the regulator (? Name ?) to open vs. auto in order to heat my house, but when I turn it back to Auto it cuts off the gas to the burner and no heat...

My furnace won't exnite after power outage! [ 2 Answers ]

I have a Day & Night furnace Model # 80CD-12A Series 152, It was working fine until we had a power outage. Now the pilot light has a flame, but when I turn the thermostat on the burners don't exnite. Do I need to turn the (furnance) gas totally off and restart the whole system? Is there a safety...

Concord furnace start up after power outage [ 7 Answers ]

Hi everyone, I have a 3 year old Concord model CG90UA. Having a problem re-lighting the pilot after a power outage. Have followed the procedure in the manual. The Honeywell controller is flashing an error code 4 flashes. This refers to a problem with the limit or rollout switch open? Have tried...

Furnace blows cold air after power outage [ 1 Answers ]

My furnace made a loud noise as the power went out yesterday. The electricity is back on now, but the furnace only blows cold air? Is this something I can correct myself?


View more questions Search