Ask Experts Questions for FREE Help !
Ask
    Jamesmlvrz1976's Avatar
    Jamesmlvrz1976 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 31, 2012, 12:59 PM
    So, Ive been told I could use the salt water , pyrex or glass dish...
    What kind of sheet or screen do I use as a contact for theplacing of the gold upon while submergered in the salt water and to connect the positive contact to. Also I understand to connect the. Negative to a stainless steel rod or carbinide rod for being submerged in the water? I believe one of the types will cause the gold to attach to it? Also a somewhat low voltage/amperage is all that is needed to recover the gold plating before melting with a bit of flux to remove impurities . Result being sellable gold ingot/s?
    gyoung555's Avatar
    gyoung555 Posts: 7, Reputation: 1
    New Member
    		  
    #2

    Jan 15, 2013, 10:40 PM
    Taking plating off does NOT work that way...
    I wish it did, I would have many many hours of my life back!!

    The weight of the gold is Very Very small on a plated piece. If you where to have enough gold to sell of then a true Refiner is the answer. They will pay you for both the gold and silver. But a large quantity is needed to be cost effective.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Duck salt dish, swan handle spoon stamped JC 950? [ 0 Answers ]

I have a few items silver metal stamped 950 and jc, I am unable to find much on the internet except platinum is stamped 950. I have some pictures that I can email if anyone could help me identify these, I would appreciate it Thanks kathy

I have a Kenmore Ultra III dish washer. Recently a glass broken inside. It is clogg [ 1 Answers ]

My dish washer is not draining since a drinking glass broke inside. I picked broken pieces which were in the bottom. However, I believe more small glass pieces inside are blocking the drainage of water. I need to know how can I remove the entrapped pieces. It is Kenmore Ultra Wash III dish...

Pyrex glass coffee pot parts [ 1 Answers ]

Does anybody know where I could buy a glass stem for my 9-cup Pyrex glass coffeemaker?

Dead Sea Salt for use in my salt water pool? [ 1 Answers ]

Hi, I am converting my swimming pool (25000 gallons of water) into a salt water pool. I just bought the Jandy generator and I need to get 80 lbs of salt ( I think) . It clearly states to get 100 percent NAC1. Can I use Dead Sea Salt?

Salt shakers: Why glass? [ 3 Answers ]

There is just that scratching-on-the-board feel when I screw the metal cap back onto the glass shaker. Also, it will break if I happen to drop it. What is behind the glass factor? Lets say, why not plastic? It's cheaper to make and doesn't break. Does it have to do with taste? I don't...

View more questions Search