Ask Experts Questions for FREE Help !
Ask
    meftah's Avatar
    meftah Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 8, 2010, 07:00 PM
    I have a Kenmore Ultra III dish washer. Recently a glass broken inside. It is clogg
    My dish washer is not draining since a drinking glass broke inside. I picked broken pieces which were in the bottom. However, I believe more small glass pieces inside are blocking the drainage of water. I need to know how can I remove the entrapped pieces. It is Kenmore Ultra Wash III dish washer. Thanks in advance for your assistance.
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
     
    #2

    Dec 8, 2010, 08:04 PM
    All dishwashers as far as I know are pretty similar: take off the toe kick, grab the sides of the washer and slide it out (2 clips at the top may be attached to the counter), and take off the clamp or clip holding on the rubber drain hose. Remove it at the waste pipe or disposer end too if needed, and replace if glass is stuck.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dish washer doesn't drain [ 3 Answers ]

We have an old Kenmore dishwasher that was here when we purchased our home 8 years ago(no telling how long it had been here before then). The water dosen't drain out anymore. I have disconnected the hose on both sides... there seems to be no clogs... I feel the pump is no good... I would like...


View more questions Search