 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Luxaire blower problems
I have an older Luxair gas furnace the furnace works fine heats up the temperature but once it reaches the temperature and the heat turns off the blower continues to run. I have checked all belts and look for debris in the blower but again the blower is working fine it just does not shut off I have tried to find schematics for this furnace to find either a relay for some sort of sensor with no luck
|
||||
Check out some similar questions!
I am trying simply to find the schematics for a Snyder General A/C-furnace blower. Apparently the company has changed hands several time since this unit was installed. The Blower is a model # DEBA010G... All I want to do is make sure that this blower is wired on High. Thanks!
I have a Luxaire central AC. I works fine, it just makes a sound like the fan is hitting something, but its not. What else could be causing this ratteling sound? Is there a way to lubricate the fan?
PBNU-LD20N100D Maybe 2 to 3 times a season it refuses to ignite. Gas valve is getting 24 volts from the control & clicks & passes gas at the prescribed time. Pressure switches all with proper voltage, new draft fan, unobstructed airflow piping. Happens most often in fall when temps make big...
My Luxaire furnace (installed in 2005) shows a red light that flashes 3 times. The symptom is that no air will blow out of the furnace, even though the unit makes a humming sound like it wants to kick on.
My heat pump has intermittent problem. In the ac mode every once in a while the blower motor fails to come on. When this happens I turn the switch to heat and turn the thermostat all the way up the blower comes on. I then turn it back to cool turn the thermostat down and it stays on and cycles...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
