Generac exl8000

DIYer1 Posts: 1, Reputation: 1

New Member

Oct 31, 2012, 07:28 AM

Generac exl8000

I have a generac exl8000 with only 17 hours on it. It starts and runs great but is only putting out 1.1 volts and I'm not sure where to start

Check out some similar questions!

EXL8000 generator< Vin#030244 Needs Help. [ 1 Answers ]

Have XL8000 generator,Vin#030544, Rev 02 SEries 1015180853. All of a suddden when engine turns on I no longer get any power from the generator to Produce electricity. What has happened? Any suggestions on how to fix? Thanks in advance for any ideas you can give me. Ed

Generac Engine Specs model052331 ser# 7078535 15 hp. On a generac exl8000 generator [ 1 Answers ]

I need to know the valve settings so I can put this engine back in use

EXL8000 15HP Generator will not idle [ 0 Answers ]

I have new EXL8000 15Hp Generator that will not idle. Manually, I can throttle back, but when I release govener... runs full speed. Could this be a MFG defect? Will running full speed with no load eventually damage generator? The Generator is bigger than my car can handle so---taking it to...

Generac exl8000 repair [ 9 Answers ]

I just bought a Generac EXL8000 with a Briggs 15HP motor and 5.4 hours on the meter. The motor was only running at half throttle, and I could see that the governor spring had been relocated to keep the motor from revving too high. I thought it would be a simple adjustment. However, today I found...

Briggs and stratton exl8000 [ 2 Answers ]

Is the EXL8000 too much for a 28 ft RV trailor ?

View more questions Search

Check out some similar questions!

Add your answer here.