Ask Experts Questions for FREE Help !
Ask
    mojave1964's Avatar
    mojave1964 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 27, 2012, 06:43 PM
    Venter pressure switch vent blockage
    My furnace is blinking 3 time what can I do to fix

Check out some similar questions!

What makes a venter pressure switch close on a Goodman furnace? [ 0 Answers ]

I just had a new condrnsate pump installed. Is it possible that it was not connected correctly?. As I said before, I've repaced the pressure switch and it worked the first time I started my furnace.

What makes a furnace venter pressure switch close? [ 2 Answers ]

My furnace will not come on. The LED flashes 3 times, which tells me the venter is plugged or my pressure stch is open. I bypassed the pressure switch and everything works fine. I installed a new pressure switch and the furnace came on as normal and the LED stayed on as it is meant to. I put the...

Trane xr80 vent blockage [ 1 Answers ]

We are having a blizzard here right now, and after troubleshooting, and seeing a continuous fast blinking code, I think the snow must best blocking our roof vent. Is this a common problem, or should I look farther?

Goodman venter end switch problem: 3 Flashing LEDs [ 0 Answers ]

I have a Goodman PGB030050-1 and the status light is flashing 3 LEDs, which corresponds to the code "END SWITCH CLOSED WITHOUT INDUCER ON". When I reset the breaker on the end switch, everything fires up and runs fine for a few hours, then shuts down with the same status light code. I have read...

Possible air vent blockage [ 1 Answers ]

When I run the water in the bath room sink (1 level house) The bathtub drain gurgles and it smells like sewer gases coming from the drain:( . Could this be a blockage in the air vent pipe? And if so how do I clear it short of calling a plumber? Thanks for any help you can give. Acct1

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.