Check out some similar questions!
Replacing lennox thermostat w honeywell - wiring question
[ 3 Answers ]
I have an old mechanical (mercury switch) lennox thermostat driving a heat pump - I am trying to replace with a Honeywell RTH7500D. The wiring is confusing as the Lennox matches nothing in the manual. I found a matrix on here that seemed to explain the Lennox thermostat quite well and when I...
Replacing Old thermostat, wiring confuses me
[ 5 Answers ]
I am replacing an old emerson electric thermostat with mercury for a programmable Honeywell thermostat. I have only a furnace, no A/C. When I took the cover off the old thermostat I have 4 wires, 2 black and 2 white, which were connected on two connectors, black at the top on the right side and...
Replacing Honeywell with Hunter Thermostat Wiring
[ 11 Answers ]
I'm replacing my Honeywell T841A1423 thermostat with a Hunter 44660 thermostat but can't cross reference the wiring references: Honeywell are: W2, W3 G, R, O, Y, X Hunter are: Y1, RH, RC1, RC, Y/O, W/B, G
Replacing a Nordyne Thermostat for a Hunter 44260 Wiring!
[ 4 Answers ]
I'm having issues, I want to replace my old thermostat for this digital one however, I'm not sure on the wiring. On the Nordyn I had, Y G R O
How do I match wiring when replacing a programmable thermostat?
[ 6 Answers ]
Had to replace the programmable thermostat. Instructions weren't clear to me as far as what jumper settings of on or off looked like. Does "on" indicate placing the plastic piece over the jumper posts? I have 5 wires, White, Yellow, Red (which was connected to RH, then had a piece of wire... View more questions Search
Add your answer here.
|